Master Technology Skills.
Built for the Trades.
Structured, certification-ready courses built for electricians, apprentices, and industrial technicians. Each course includes presentations, study guides, section tests, and a final exam.
Every course is unlocked through your support. A YouTube subscription is the minimum — paid course donations go directly to the Southern Tradesman Foundation to fund scholarships and workforce development in Alabama.
Learn to Read a Tape Measure
A practical, visual walkthrough of tape measure fundamentals. Learn to identify tape styles, read fractions accurately, understand foot marks and black diamond marks, and apply measurements in real-world scenarios.
Interactive Presentation — Tape types, U.S. Standard vs. Metric, fraction marks, foot marks, black diamond mark, sliding tip, and ruler game
5 Practice Quizzes — Inch, half-inch, quarter-inch, eighths, and sixteenths
Final Quiz — Comprehensive assessment
Printable Certificate
Your YouTube subscription is your show of support. Subscribe to Tesla Harmonics and your join code will be provided.
Subscribe to Support & Access CourseLock-Out / Tagout
Learn proper procedures for controlling hazardous energy during maintenance and servicing. Covers all 6 hazardous energy types, the complete 8-step LOTO procedure, training requirements, and program compliance.
Video Presentation — Hazardous energy types, when LOTO applies, 8-step procedure, training & inspection requirements
Key Concepts Review — Authorized vs. affected employees, stored energy control
Multiple Choice Test
Certificate of Completion
Donation goes directly to the Southern Tradesman Foundation.
Donate $25 & Access CourseIntroduction to Ohm's Law
Master circuit fundamentals from the ground up. Learn Ohm's Law, the Power Wheel, series/parallel/combination circuits, and the Tesla Harmonics 4-Step Solve Method for real-world application and certification prep.
Video Presentation — Ohm's Law history, the Power Wheel, circuit analysis, and the 4-Step Solve Method
Warm-Up Calculation Sets — Guided practice problems
Follow-Along Workbook — Series, parallel, and combination circuit problems with step-by-step solutions
Final Test
Certificate of Completion
Donation goes directly to the Southern Tradesman Foundation.
Donate $50 & Access CourseConduit Bending & Installations
Master every bend type, offset calculation, saddle layout, and conduit installation technique used in the field — from hand benders and 90° stub-ups to 3-point and 4-point saddles, cutting, reaming, and threading.
Presentation 1 — Bender types, conduit types, 90° stub-ups, take-up, sweeping bends, back-to-back bends
Presentation 2 — Offsets, box offsets, NEC requirements, shrink, dog legs, offset bending chart
Presentation 3 — 3-point and 4-point saddle bends, measuring, layout, step-by-step bending sequences
Presentation 4 — Cutting, reaming & threading EMT, IMC, and RMC
Conduit Bending Reference Card — Offset chart, formula table, saddle chart, and gain chart
Final Exam
Certificate of Completion
Donation goes directly to the Southern Tradesman Foundation.
Donate $75 & Access CourseIndustrial Motor Controls
Master motor control circuits from the ground up — diagrams, symbols, contactors, VFDs, and hands-on wiring labs built for real-world application.
Module 1: The Basics — Diagrams, Symbols, Test Instruments, Safety, Contactors
Module 2: Parts, Symbols and Diagrams — Motor Control Parts ID, Symbols, Circuit Design
Module 3: Tools and Hands-On Motor Control Circuits — Wiring Labs 1–4
Donation goes directly to the Southern Tradesman Foundation.
Donate $100 & Access CourseNFPA-70E Arc Flash / Arc Blast
Comprehensive electrical safety training covering arc flash hazards, PPE requirements, LOTO procedures, and visual hazard recognition. Includes final exam.
Module 1: Foundations of Electrical Hazard Awareness
Module 2: Arc Flash, Arc Blast & the Role of PPE
Module 3: Lock-out/Tag-out (LOTO) and Controlling Hazardous Energy
Module 4: Visual Hazard Recognition & Unsafe Conditions
Module 5: NFPA 70E Final Exam
Donation goes directly to the Southern Tradesman Foundation.
Donate $100 & Access CourseMore Courses in Development
New courses covering residential wiring, commercial systems, PLC programming, and more are on the way.
Get NotifiedContact Us
Questions about training, partnerships, or resource requests? Drop us a message.
Ready to take your skills
to the next level?
Join 1,400+ electricians and students learning for free on YouTube. New lessons every week.